Context Navigation

source: osgVisual/trunk/CMakeLists.txt @ 243

Last change on this file since 243 was 243, checked in by Torben Dannhauer, 13 years ago

File size: 17.4 KB

Line
1	#################################################################################################
2	# This file allows to configure osgVisual with CMAKE to generate native build solutions. #
3	# #
4	# Specify the following environment variables to use osgVisual and this CMAKE script: #
5	# * OSG_ROOT: Path to your 32 bit (x86) OSG, e.g. D:\OSG\OpenSceneGraph-2.9.8_x86 #
6	# * OSG_ROOT_X64: Path to your 64 bit (x64) OSG, e.g. D:\OSG\OpenSceneGraph-2.9.8_x64 #
7	# * OSG: Path to your 32 bit (x86) OSG and 3rdParty binary folder, #
8	# e.g. %OSG_ROOT%\bin;D:\OSG\3rdParty\bin\x86 #
9	# * OSG_X64: Path to your 64 bit (x64) OSG and 3rdParty binary folder, #
10	# e.g. %OSG_ROOT_X64%\bin;D:\OSG\3rdParty\bin\x64 #
11	# * PATH: Extend with %OSG% or %OSG_X64% to use OSG and osgVisual from command line, #
12	# e.g. PATH=%PATH%;%OSG% #
13	# #
14	# NOTE: On Visual Studio and x64 Arch, CMAKE uses the project settings to specify the #
15	# correct x64 OSG path, so you can use the 32bit OSG in your system path. #
16	# #
17	# #
18	#################################################################################################
19
20	cmake_minimum_required(VERSION 2.8)
21
22
23	PROJECT(osgVisual)
24	#SET(CMAKE_MODULE_PATH "${osgVisual_SOURCE_DIR}/../CMakeModules;${CMAKE_MODULE_PATH}")
25
26	# Check Architecture
27	IF( CMAKE_SIZEOF_VOID_P EQUAL 4 )
28	MESSAGE( STATUS "32 bit architecture detected" )
29	SET(DESTINATION_ARCH "x86")
30	ENDIF()
31	IF( CMAKE_SIZEOF_VOID_P EQUAL 8 )
32	MESSAGE( STATUS "64 bit architecture detected" )
33	SET(DESTINATION_ARCH "x64")
34	ENDIF()
35
36
37	# Get required packages
38	IF(DESTINATION_ARCH STREQUAL "x64")
39	SET(OSG_ROOT_BKP $ENV{OSG_ROOT}) # BACKUP old OSG_ROOT
40	SET(ENV{OSG_ROOT} $ENV{OSG_ROOT_X64}) # Replace OSGROOT with OSG_ROOT_X64 to force CMAKE to find the correct OSG version (64 bit)
41	ENDIF ()
42
43	SET(OpenSceneGraph_MARK_AS_ADVANCED ON)
44	FIND_PACKAGE(OpenSceneGraph 2.9.9 REQUIRED osgViewer OpenThreads osgDB osgTerrain osgGA osgText osgSim osgUtil)
45	FIND_PACKAGE(OpenGL REQUIRED)
46
47
48	IF(DESTINATION_ARCH STREQUAL "x64")
49	SET(ENV{OSG_ROOT} ${OSG_ROOT_BKP}) # Restore old OSG_ROOT
50	UNSET(OSG_ROOT_BKP) # Delete backup
51	ENDIF ()
52
53	# LIBXML2
54	SET(LIBXML2_LIBRARY ../../../OpenSceneGraph/3rdParty_x86_x64/${DESTINATION_ARCH}/lib/libxml2 CACHE FILEPATH "Select the libxml2 library to link osgVisual against. REQUIRED!" )
55	SET(LIBXML2_INCLUDE ../../../OpenSceneGraph/3rdParty_x86_x64/${DESTINATION_ARCH}/include CACHE PATH "Select the libxml2 include path to link osgVisual against. REQUIRED!" )
56	INCLUDE_DIRECTORIES( ${LIBXML2_INCLUDE} )
57
58	# Module sky-silverlining
59	# OPTION( OPTION_VAR "description string" [initial value] )
60	IF ( WIN32 )
61
62	SET(USE_SKY_SILVERLINING ON CACHE BOOL "Enable to use Sundog-soft's Silverlining SDK for sky & weather")
63	IF(USE_SKY_SILVERLINING )
64
65	SET(checkSL $ENV{SILVERLINING_PATH})
66	IF(NOT checkSL)
67	MESSAGE( "You have activated SilverLining [SL] in CMake, but the SL installation path could not be found!" )
68	MESSAGE( "Please deactivate SL or setup the SL pathes in CMake manually!" )
69	ENDIF()
70
71
72	SET(SOURCES
73	${SOURCES}
74	include/sky_Silverlining/skySilverLining_AtmosphereReference.h
75	include/sky_Silverlining/skySilverLining_cloudLayerSlot.h
76	include/sky_Silverlining/skySilverLining_cloudsDrawable.h
77	include/sky_Silverlining/skySilverLining_ProjectionMatrixCallback.h
78	include/sky_Silverlining/skySilverLining_skyDrawable.h
79	include/sky_Silverlining/visual_skySilverLining.h
80	src/sky_Silverlining/skySilverLining_cloudsDrawable.cpp
81	src/sky_Silverlining/skySilverLining_skyDrawable.cpp
82	src/sky_Silverlining/visual_skySilverLining.cpp
83	)
84
85	IF (DESTINATION_ARCH STREQUAL "x86")
86	SET(SILVERLINING_ARCH "win32")
87	ELSEIF ( DESTINATION_ARCH STREQUAL "x64" )
88	SET(SILVERLINING_ARCH "x64")
89	ENDIF ()
90	SET(SILVERLINING_LIBRARY_RELEASE $ENV{SILVERLINING_PATH}\\lib\\vc9\\${SILVERLINING_ARCH}\\SilverLining-MT-DLL.lib CACHE FILEPATH "Select the release library of Sundog-Soft's Silverlining SDK to link against." )
91	SET(SILVERLINING_LIBRARY_DEBUG $ENV{SILVERLINING_PATH}\\lib\\vc9\\${SILVERLINING_ARCH}\\SilverLining-MTD-DLL.lib CACHE FILEPATH "Select the debug library of Sundog-Soft's Silverlining SDK to link against." )
92	SET(SILVERLINING_INCLUDE_DIR "$ENV{SILVERLINING_PATH}\\Public Headers" CACHE PATH "Enter the path to the the public Include directory of Sundog-Soft's Silverlining SDK" )
93	SET(SILVERLINING_LICENSEE "Your user name" CACHE STRING "Enter your Silverlining licensee name. If you license available, osgVisual will work with silverlining as 5 minute demo with the default value." )
94	SET(SILVERLINING_LICENSE "Your license code" CACHE STRING "Enter your Silverlining license key. If you license available, osgVisual will work with silverlining as 5 minute demo with the default value." )
95	INCLUDE_DIRECTORIES(${SILVERLINING_INCLUDE_DIR} include/sky_Silverlining)
96	ADD_DEFINITIONS( "-DUSE_SKY_SILVERLINING" )
97	ADD_DEFINITIONS( "-DSILVERLINING_LICENSEE=\"${SILVERLINING_LICENSEE}\"" )
98	ADD_DEFINITIONS( "-DSILVERLINING_LICENSE=\"${SILVERLINING_LICENSE}\"" )
99
100	ELSE(USE_SKY_SILVERLINING)
101	UNSET(SILVERLINING_LIBRARY_RELEASE CACHE)
102	UNSET(SILVERLINING_LIBRARY_DEBUG CACHE)
103	UNSET(SILVERLINING_INCLUDE_DIR CACHE)
104	UNSET(SILVERLINING_LICENSEE)
105	UNSET(SILVERLINING_LICENSE)
106	ENDIF(USE_SKY_SILVERLINING)
107	ENDIF(WIN32)
108	IF(UNIX)
109	SET(USE_SKY_SILVERLINING ON CACHE BOOL "Enable to use Sundog-soft's Silverlining SDK for sky & weather")
110	IF(USE_SKY_SILVERLINING )
111	SET(SOURCES
112	${SOURCES}
113	include/sky_Silverlining/skySilverLining_AtmosphereReference.h
114	include/sky_Silverlining/skySilverLining_cloudLayerSlot.h
115	include/sky_Silverlining/skySilverLining_cloudsDrawable.h
116	include/sky_Silverlining/skySilverLining_ProjectionMatrixCallback.h
117	include/sky_Silverlining/skySilverLining_skyDrawable.h
118	include/sky_Silverlining/visual_skySilverLining.h
119	src/sky_Silverlining/skySilverLining_cloudsDrawable.cpp
120	src/sky_Silverlining/skySilverLining_skyDrawable.cpp
121	src/sky_Silverlining/visual_skySilverLining.cpp
122	)
123
124	IF (DESTINATION_ARCH STREQUAL "x86")
125	SET(SILVERLINING_ARCH "win32")
126	ELSEIF ( DESTINATION_ARCH STREQUAL "x64" )
127	SET(SILVERLINING_ARCH "x64")
128	ENDIF ()
129	SET(SILVERLINING_LIBRARY_RELEASE $ENV{SILVERLINING_PATH}\\lib\\vc9\\${SILVERLINING_ARCH}\\SilverLining-MT-DLL.lib CACHE FILEPATH "Select the release library of Sundog-Soft's Silverlining SDK to link against." )
130	SET(SILVERLINING_LIBRARY_DEBUG $ENV{SILVERLINING_PATH}\\lib\\vc9\\${SILVERLINING_ARCH}\\SilverLining-MTD-DLL.lib CACHE FILEPATH "Select the debug library of Sundog-Soft's Silverlining SDK to link against." )
131	SET(SILVERLINING_INCLUDE_DIR "$ENV{SILVERLINING_PATH}\\Public Headers" CACHE PATH "Enter the path to the the public Include directory of Sundog-Soft's Silverlining SDK" )
132	SET(SILVERLINING_LICENSEE "Your user name" CACHE STRING "Enter your Silverlining licensee name. If you license available, osgVisual will work with silverlining as 5 minute demo with the default value." )
133	SET(SILVERLINING_LICENSE "Your license code" CACHE STRING "Enter your Silverlining license key. If you license available, osgVisual will work with silverlining as 5 minute demo with the default value." )
134	INCLUDE_DIRECTORIES(${SILVERLINING_INCLUDE_DIR} "include/sky_Silverlining" )
135	ADD_DEFINITIONS( "-DUSE_SKY_SILVERLINING" )
136	ADD_DEFINITIONS( "-DSILVERLINING_LICENSEE=\"${SILVERLINING_LICENSEE}\"" )
137	ADD_DEFINITIONS( "-DSILVERLINING_LICENSE=\"${SILVERLINING_LICENSE}\"" )
138
139	ELSE(USE_SKY_SILVERLINING)
140	UNSET(SILVERLINING_LIBRARY_RELEASE CACHE)
141	UNSET(SILVERLINING_LIBRARY_DEBUG CACHE)
142	UNSET(SILVERLINING_INCLUDE_DIR CACHE)
143	UNSET(SILVERLINING_LICENSEE)
144	UNSET(SILVERLINING_LICENSE)
145	ENDIF(USE_SKY_SILVERLINING)
146	ENDIF()
147
148	# Module distortion
149	SET(USE_DISTORTION OFF CACHE BOOL "Enable to use distortion with Projection Designer's distortion maps")
150	IF(USE_DISTORTION)
151	SET(SOURCES
152	${SOURCES}
153	include/distortion/visual_distortion.h
154	src/distortion/visual_distortion.cpp
155	)
156	INCLUDE_DIRECTORIES(include/distortion)
157	ADD_DEFINITIONS( "-DUSE_DISTORTION" )
158	ENDIF(USE_DISTORTION)
159
160
161	# Module Vista2D - Only available under Win32
162	if( WIN32 )
163	SET(USE_VISTA2D OFF CACHE BOOL "Enable to use Vista2D by Wetzel Technology")
164	IF( USE_VISTA2D )
165	INCLUDE_DIRECTORIES( include/vista2D )
166	SET(SOURCES
167	${SOURCES}
168	include/vista2D/visual_vista2D.h
169	src/vista2D/visual_vista2D.cpp
170	)
171	SET(VISTA2D_INCLUDE_DIR . CACHE PATH "Select the INCLUDE directory path for Vista2D by Wetzel Technology." )
172	SET(VISTA2D_LIBRARY_DEBUG . CACHE FILEPATH "Select debug LIBRARY path for linking against Vista2D by Wetzel Technology." )
173	SET(VISTA2D_LIBRARY_RELEASE . CACHE FILEPATH "Select release LIBRARY path for linking against Vista2D by Wetzel Technology." )
174	INCLUDE_DIRECTORIES(${VISTA2D_INCLUDE_DIR})
175	ADD_DEFINITIONS( "-DUSE_VISTA2D" )
176	ELSE(USE_VISTA2D)
177	UNSET(VISTA2D_INCLUDE_DIR CACHE)
178	UNSET(VISTA2D_LIBRARY_DEBUG CACHE)
179	UNSET(VISTA2D_LIBRARY_RELEASE CACHE)
180	ENDIF(USE_VISTA2D)
181	ENDIF(WIN32)
182
183
184	# Module Spacenavigator manipulator - ONLY under WIN32
185	if( WIN32 )
186	# No header or linking required, because WIN32 COM interface used.
187	SET(USE_SPACEMOUSE ON CACHE BOOL "Enable to use camera manipulator based on Spacenavigator by 3DConnexion")
188	IF( USE_SPACEMOUSE )
189	SET(SOURCES
190	${SOURCES}
191	include/manip_Spacemouse/manip_spaceMouse.h
192	include/manip_Spacemouse/manip_freeSpaceMouse.h
193	include/manip_Spacemouse/manip_nodeTrackerSpaceMouse.h
194	src/manip_Spacemouse/manip_spaceMouse.cpp
195	src/manip_Spacemouse/manip_freeSpaceMouse.cpp
196	src/manip_Spacemouse/manip_nodeTrackerSpaceMouse.cpp
197	)
198	INCLUDE_DIRECTORIES(include/manip_Spacemouse)
199	ADD_DEFINITIONS( "-DUSE_SPACENAVIGATOR" )
200	ENDIF(USE_SPACEMOUSE)
201	ENDIF(WIN32)
202
203
204	# Module cluster
205	SET(SOURCES
206	${SOURCES}
207	include/cluster/dataIO_cluster.h
208	include/cluster/dataIO_clusterDummy.h
209	src/cluster/dataIO_clusterDummy.cpp
210	)
211	SET(USE_CLUSTER_ASIO_TCP_IOSTREAM OFF CACHE BOOL "Enable to use the Boost ASIO TCP iostream implementation for the cluster interface")
212	SET(USE_CLUSTER_ENET ON CACHE BOOL "Enable to use the ENet reliable UDP library implementation for the cluster interface")
213	IF( USE_CLUSTER_ASIO_TCP_IOSTREAM )
214	SET(SOURCES
215	${SOURCES}
216	include/cluster/dataIO_clusterAsioTcpIostream.h
217	src/cluster/dataIO_clusterAsioTcpIostream.cpp
218	)
219	ADD_DEFINITIONS( "-DUSE_CLUSTER_ASIO_TCP_IOSTREAM" )
220	ADD_DEFINITIONS( "-D_WIN32_WINNT=0x0501" )
221	SET(BOOST_LIBRARY_PATH "../../../3rdParty_x86_x64/lib/${DESTINATION_ARCH}/" CACHE PATH "Select the library folder of Boost libraries to link against." )
222	SET(BOOST_INCLUDE_DIR "../../../3rdParty_x86_x64/include/boost-1.43.0/" CACHE PATH "Enter the path to the the include directory of Boost" )
223	INCLUDE_DIRECTORIES(${BOOST_INCLUDE_DIR})
224	LINK_DIRECTORIES(${BOOST_LIBRARY_PATH})
225	ELSE()
226	UNSET(BOOST_LIBRARY_PATH CACHE)
227	UNSET(BOOST_ASIO_INCLUDE_DIR CACHE)
228	ENDIF()
229
230	IF( USE_CLUSTER_ENET )
231	SET(SOURCES
232	${SOURCES}
233	include/cluster/dataIO_clusterENet.h
234	src/cluster/dataIO_clusterENet.cpp
235	include/cluster/dataIO_clusterENet_implementation.h
236	src/cluster/dataIO_clusterENet_implementation.cpp
237	src/cluster/enet/callbacks.c
238	src/cluster/enet/compress.c
239	src/cluster/enet/host.c
240	src/cluster/enet/list.c
241	src/cluster/enet/packet.c
242	src/cluster/enet/peer.c
243	src/cluster/enet/protocol.c
244	src/cluster/enet/unix.c
245	src/cluster/enet/win32.c
246	include/cluster/enet/callbacks.h
247	include/cluster/enet/enet.h
248	include/cluster/enet/list.h
249	include/cluster/enet/protocol.h
250	include/cluster/enet/time.h
251	include/cluster/enet/types.h
252	include/cluster/enet/unix.h
253	include/cluster/enet/utility.h
254	include/cluster/enet/win32.h
255	)
256	ADD_DEFINITIONS( "-DUSE_CLUSTER_ENET" )
257	ENDIF()
258
259
260
261
262	# Module extLink
263	SET(SOURCES
264	${SOURCES}
265	include/extLink/dataIO_extLinkDummy.h
266	src/extLink/dataIO_extLinkDummy.cpp
267	include/extLink/dataIO_extLink.h
268	include/extLink/manip_extLink.h
269	src/extLink/manip_extLink.cpp
270	)
271	IF ( WIN32 )
272	SET(USE_EXTLINK_VCL ON CACHE BOOL "Enable to use the VCL Implementation for the externalLink interface")
273	IF( USE_EXTLINK_VCL )
274	SET(EXTLINK_VCL_INCLUDE_DIR ../../VCL_1.0.3.4/source/include/VCL CACHE PATH "Select the INCLUDE directory path for extLink VCL Implementation." )
275	SET(SOURCES
276	${SOURCES}
277	include/extLink/dataIO_extLinkVCL.h
278	src/extLink/dataIO_extLinkVCL.cpp
279	)
280	INCLUDE_DIRECTORIES(${EXTLINK_VCL_INCLUDE_DIR})
281	ADD_DEFINITIONS( "-DUSE_EXTLINK_VCL" )
282	#Linking: VCL uses #pragma to link, no need for linking configuration in CMAKE
283	ELSE(USE_EXTLINK_VCL)
284	UNSET(EXTLINK_VCL_INCLUDE_DIR CACHE)
285	ENDIF(USE_EXTLINK_VCL)
286	ELSE(WIN32)
287	UNSET(EXTLINK_VCL_INCLUDE_DIR CACHE)
288
289
290	ENDIF(WIN32)
291
292
293
294	# Set core sources
295	SET(SOURCES
296	${SOURCES}
297	# Core
298	include/core/visual_core.h
299	src/core/visual_core.cpp
300	src/core/osgVisual.cpp
301	include/core/core_manipulator.h
302	src/core/core_manipulator.cpp
303	# Memory Leak debugging
304	include/core/leakDetection.h
305	# Util
306	include/util/visual_util.h
307	src/util/visual_util.cpp
308	# Draw 2D
309	include/draw2D/visual_draw2D.h
310	src/draw2D/visual_draw2D.cpp
311	# Debug HUD
312	include/draw2D/visual_debug_hud.h
313	src/draw2D/visual_debug_hud.cpp
314	# Example HUD
315	include/draw2D/visual_hud.h
316	src/draw2D/visual_hud.cpp
317	# Draw 3D
318	include/draw3D/visual_draw3D.h
319	src/draw3D/visual_draw3D.cpp
320	# Object Mounted Manipulator
321	include/manip_ObjectMounted/manip_objectMounted.h
322	src/manip_ObjectMounted/manip_objectMounted.cpp
323	# Objects
324	include/object/visual_object.h
325	include/object/object_updater.h
326	src/object/visual_object.cpp
327	src/object/object_updater.cpp
328	# DataIO
329	include/dataIO/visual_dataIO.h
330	include/dataIO/dataIO_transportContainer.h
331	include/dataIO/dataIO_slot.h
332	include/dataIO/dataIO_executer.h
333	src/dataIO/visual_dataIO.cpp
334	src/dataIO/dataIO_transportContainer.cpp
335	src/dataIO/dataIO_slot.cpp
336	src/dataIO/dataIO_executer.cpp
337	)
338
339	INCLUDE_DIRECTORIES(include/core include/util include/draw2D include/draw3D include/object include/manip_ObjectMounted)
340	INCLUDE_DIRECTORIES(include/dataIO include/cluster include/extLink ${OPENSCENEGRAPH_INCLUDE_DIRS} .)
341
342
343	# Executable Output
344	SET(CMAKE_RUNTIME_OUTPUT_DIRECTORY ${CMAKE_SOURCE_DIR}/bin)
345	ADD_EXECUTABLE(osgVisual ${SOURCES})
346
347
348	# Linking
349	TARGET_LINK_LIBRARIES(osgVisual ${OPENSCENEGRAPH_LIBRARIES} ${OPENGL_LIBRARIES} ${LIBXML2_LIBRARY})
350
351
352	IF(USE_SKY_SILVERLINING )
353	IF(WIN32)
354	TARGET_LINK_LIBRARIES(osgVisual "winmm.lib")
355	ENDIF(WIN32)
356	TARGET_LINK_LIBRARIES(osgVisual debug ${SILVERLINING_LIBRARY_DEBUG} optimized ${SILVERLINING_LIBRARY_RELEASE})
357	ENDIF(USE_SKY_SILVERLINING)
358
359	IF(USE_VISTA2D)
360	TARGET_LINK_LIBRARIES(osgVisual debug ${VISTA2D_LIBRARY_DEBUG} optimized ${VISTA2D_LIBRARY_RELEASE})
361	ENDIF(USE_VISTA2D)
362
363	IF(USE_CLUSTER_ENET AND WIN32)
364	TARGET_LINK_LIBRARIES(osgVisual "winmm.lib" "ws2_32.lib" )
365	ENDIF(USE_CLUSTER_ENET AND WIN32)
366
367	# CMAKE Fix for VS to not prepend build type to path.
368	IF(MSVC)
369	SET_TARGET_PROPERTIES(osgVisual PROPERTIES PREFIX "../")
370	ENDIF(MSVC)
371	SET_TARGET_PROPERTIES( osgVisual PROPERTIES DEBUG_POSTFIX d )
372
373	# Adding definitions to disable multicore compiling
374	IF(MSVC)
375	SET(CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} /MP1")
376	ENDIF(MSVC)
377
378	# Generating vcproj file, if MSVC to preset debugging parameter - based on http://stackoverflow.com/questions/1005901/how-to-set-path-environment-variable-using-cmake-and-visual-studio-to-run-test
379	IF (MSVC)
380	# Set up a default .user file that contains the debugging setup
381	## Find user and system name
382	SET(SYSTEM_NAME $ENV{USERDOMAIN} CACHE STRING "Build System Name")
383	SET(USER_NAME $ENV{USERNAME} CACHE STRING "Build System UserName")
384	SET(USERFILE_COMMAND_DEBUG "$(TargetPath)" CACHE STRING "Command to execute on debugging (VS Project settings)" )
385	SET(USERFILE_WORKING_DIRECTORY_DEBUG "bin" CACHE STRING "Working directory on debugging (VS Project settings)" )
386	SET(USERFILE_COMMAND_ARGUMENTS_DEBUG " --window 100 100 800 600 --config osgVisualConfig.xml" CACHE STRING "Command arguments (VS Project settings)" )
387	SET(USERFILE_REMOTE_MACHINE_DEBUG ${USER_NAME} CACHE STRING "Remote Debugging Machine (VS Project settings)")
388	IF (DESTINATION_ARCH STREQUAL "x64")
389	SET(USERFILE_ENVIRONMENT "PATH=%OSG_X64%;%PATH%" CACHE STRING "Environment Variables that VS should merge on thy fly with system environment to run osgVisual (VS Project settings)")
390	ENDIF ()
391
392
393	# Only do this if one doesn't already exist
394	SET (USER_FILE ${PROJECT_NAME}.vcproj.${SYSTEM_NAME}.${USER_NAME}.user)
395	IF (NOT EXISTS "${USER_FILE}")
396	message (STATUS "Creating ${USER_FILE} with default debug settings")
397	# These are the configuration variables
398	IF (CMAKE_GENERATOR MATCHES "Win64")
399	SET (USERFILE_PLATFORM "x64")
400	ELSE ()
401	SET (USERFILE_PLATFORM "Win32")
402	ENDIF ()
403
404	# Configure the template file
405	# MSC_VER 1300: MSC 13.0, VC 7.0, VS 2002
406	# MSC_VER 1310: MSC 13.1, VC 7.1, VS 2003
407	# MSC_VER 1400: MSC 14.0, VC 8.0, VS 2005
408	# MSC_VER 1500: MSC 15.0, VC 9.0, VS 2008
409	# MSC_VER 1600: MSC ??.0, VC 10.0, VS 2010
410	IF (MSVC_VERSION EQUAL 1400)
411	CONFIGURE_FILE(VC80.vcproj.user.template ${USER_FILE} @ONLY)
412	ENDIF()
413	IF (MSVC_VERSION EQUAL 1500)
414	CONFIGURE_FILE(VC90.vcproj.user.template ${USER_FILE} @ONLY)
415	ENDIF()
416	ELSE()
417	message (STATUS "Userfile ${USER_FILE} already exist: Skipping")
418	ENDIF()
419	ENDIF()
420
421

Note: See TracBrowser for help on using the repository browser.

Download in other formats: